Fein KBU 110-4 M Manual De Instrucciones página 29

OBJ_BUCH-0000000301-001.book Page 29 Monday, August 13, 2018 2:53 PM
en Original Instructions.
Symbols, abbreviations and terms used.
Symbol, character Explanation
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
Observe the instructions in the text or graphic opposite!
Observe the instructions in the text or graphic opposite!
Before commencing this work step, pull the mains plug out of the socket. Otherwise there
will be danger of injury if the power tool should start unintentionally.
Use eye protection during operation.
Use ear protection during operation.
Do not touch the rotating parts of the power tool.
Warning against sharp edges of application tools, such as the cutting edges of the cutter
blades.
Danger of slipping!
Danger of crushes or contusions!
Caution! Falling objects!
Hot surface!
Do not reach in!
Fasten strap!
General prohibition sign. This action is prohibited.
Additional information.
Confirms the conformity of the power tool with the directives of the European Commu-
nity.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
WARNING
Recycling symbol: designates recyclable materials
Worn out power tools and other electrotechnical and electrical products should be sorted
separately for environmental-friendly recycling.
Steel
high/low 1. gear- high speed/low speed
high/low 2. gear- high speed/low speed
high/low 3. gear- high speed/low speed
high/low 4. gear- high speed/low speed
en
29