Fein KBU 110-4 M Manual De Instrucciones página 34

OBJ_BUCH-0000000301-001.book Page 34 Monday, August 13, 2018 2:53 PM
en
34
After several hours of operation, the play in the dove-
tail guide can increase. As a consequence, the drill
motor can glide alongside the dove-tail guide by itself.
This will lead to a malfunction; when the motor glides
or runs down, the cutter can become damaged. In this
case, retighten all fastening screws of the dove-tail guide
adequately so that the drilling motor can easily be
moved manually, yet does not glide by itself (see page
19).
When the machine's power supply cable is damaged, it
must be replaced using a specially prepared power sup-
ply cable with RCD safety switch, available from the
FEIN customer service.
The current spares parts list for this power tool can be
found on our website at www.fein.com.
Use only original spare parts.
If required, you can change the following parts yourself:
Application tools, cooling-lubricant tank
Warranty and liability.
The warranty for the product is valid in accordance with
the legal regulations in the country where it is marketed.
In addition, FEIN also provides a guarantee in accord-
ance with the FEIN manufacturer's warranty declaration.
The delivery scope of your power tool may include
only a part of the accessories described or shown in this
Instruction Manual.
Declaration of conformity.
FEIN declares itself solely responsible for this product
conforming with the relevant provisions given on the
last page of this Instruction Manual.
Technical documents at: C. & E. Fein GmbH, C-D1_IA,
D-73529 Schwäbisch Gmünd
Environmental protection, disposal.
Packaging, worn out power tools and accessories
should be sorted for environmental-friendly recycling.