ASROCK X299 Creator Manual De Instrucciones página 33

Power LED and Speaker
Header
(7-pin SPK_PLED1)
(see p.1, No. 21)
Serial ATA3 Connectors
(SATA3_0_1:
see p.1, No. 15)
(SATA3_2_3:
see p.1, No. 16)
(SATA3_4_5:
see p.1, No. 17)
(SATA3_6_7:
see p.1, No. 18)
(SATA3_A1_A2:
see p.1, No. 19)
USB 2.0 Headers
(9-pin USB3_4)
(see p.1, No. 30)
(9-pin USB5_6)
(see p.1, No. 29)
USB 3.2 Gen1 Header
(19-pin USB3_5_6)
(see p.1, No. 14)
SPEAKER
DUMMY
DUMMY
+5V
1
PLED+
PLED+
PLED-
USB_PWR
P-
P+
GND
DUMMY
1
GND
P+
P-
USB_PWR
1
Dummy
IntA_PA_D+
IntA_PB_D+ IntA_PA_D-
IntA_PB_D- GND
GND IntA_PA_SSTX+
IntA_PB_SSTX+
IntA_PA_SSTX-
GND
IntA_PB_SSTX-
GND IntA_PA_SSRX+
IntA_PA_SSRX-
IntA_PB_SSRX+
IntA_PB_SSRX- Vbus
Vbus
Please connect the
chassis power LED and
the chassis speaker to this
header.
These ten SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
* To minimize the boot
time, use Intel® X299
SATA ports (SATA3_0~7)
for your bootable devices.
* If M2_3 is occupied by
a SATA-type M.2 device,
SATA3_7 will be disabled.
There are two headers
on this motherboard.
Each USB 2.0 header can
support two ports.
There is one header on
this motherboard. This
USB 3.2 Gen1 header can
support two ports.
X299 Creator
29