Kit Assembly - Metra 99-5028 Instrucciones De Instalación

ISO DIN radio provision with pocket
1. Attach the brackets to the radio
housing trim panel. (Figure A)
2. Mount the pocket to the radio
brackets with the (4) #8 x 3/8"
Phillips screws supplied. (Figure B)
3. Slide the radio into radio housing/
bracket assembly and secure with
screws supplied with the radio.
(Figure C)
4. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from Metra
and/or AXXESS.
5. Mount the new radio assembly into
the dash and reassemble dash in
reverse order of disassembly.

Kit Assembly

(Figure A)
99-5028
(Figure B)
3
(Figure C )