Setting The Timer; Programmes; Setting A Programme - Bosch BFL634G.1 Instrucciones De Uso

Timer
en
OTimer
You can use the timer as a kitchen timer. The timer runs
T i m e r
alongside other settings. You can set it at any time,
even if the device is switched off. It has its own audible
signal so that you can tell whether it is the timer or a
cooking time which has elapsed.

Setting the timer

The maximum setting is 24 hours.
The higher the value, the longer the time intervals.
Touch the field.
s
1.
The timer is displayed.
Set the timer duration using the rotary selector.
2.
Press the s field to start.
3.
The timer will also start automatically after a
Note:
few seconds.
The timer duration counts down. The display switches
back after a short time. A timer symbol is also shown on
the display.
When the timer duration comes to an end, a note
appears and an audible signal sounds. You can cancel
the audible signal early by touching the
If an operating mode with a set cooking time is
Note:
already running, the cooking time is highlighted. Touch
the field to display the timer. The timer duration is
s
highlighted for a certain amount of time and can be
altered.
Changing the timer
To change the timer, touch the
displayed in white and in focus, and can be changed by
using the rotary selector.
Cancelling the timer
If you want to cancel the timer, reset the duration on the
timer to zero. Once the change has been applied, the
symbol is no longer lit up.
12
field.
s
field. The timer is
s
PProgrammes
You can prepare food really easily using the various
P r o g r a m m e s
programmes. You select a programme and enter the
weight of your food. The program then applies the most
suitable settings.

Setting a programme

Example: "Defrost bread" programme, weight 250 g.
Press the on/off button
1.
appliance.
The appliance is ready to use.
Press the field.
%
2.
The first programme appears in the display.
Turn the rotary selector to set the required
3.
programme.
Press the field.
a
4.
The default value for the weight appears in the
display.
Turn the rotary selector to set the required weight.
5.
Press the start/stop button
6.
The cooking time counts down on the display.
Notes
The cooking time is calculated by the programmes.
■
For some dishes, the display provides instructions
■
for turning or stirring during preparation. Follow the
information provided. Opening the appliance door
pauses the operation. After closing the appliance
door, restart the operation. If you do not turn or stir
the dish, the programme runs as normal until it
reaches the end.
to switch on the
ÿ
to start.
l