en
Universal blade
Recommended speeds
1
Citrus press (only use on setting 1!)
5
Reversible slicing disc,
P rofessional Supercut
reversible disc
7
Universal blade, reversible shred
ding disc, grating disc –
mediumfine
Universal blade
r
Not suitable for use with this
z
accessory!
Universal blade
For mincing, puréeing, blending, kneading,
cutting and for making sauces and mixed
drinks.
W Risk of injury!
Do not touch the blades of the universal
blade with bare hands. Grasp the univer
sal blade by the plastic only. When not
in use, always store the universal blade
in the blade guard.
Use
X Image sequence B
Important: Only prepare the base unit as
described in the main operating instruc
tions. The accessory can only be operated
if the bowl is fitted properly.
1. Place the tool holder on the support in
the container and press down.
2. Place the universal blade on the tool
holder and press down.
3. Prepare your food. Add the food to be
processed to the container. Observe
the maximum processing quantities and
filling level.
4. Attach the lid with the pusher (,).
5. Rotate the lid in a clockwise direction
as far as possible (;). The catch lock
must be in full contact with the handle of
the container.
6. Position the universal mixer as shown
on the front yellow drive.
7. Press down and rotate in a clockwise
direction as far as possible.
12
8. Plug the mains plug into the mains.
Turn the rotary switch to the recom
mended speed.
9. Leave switched on until the required
consistency is achieved.
10. Move the rotary switch to y and wait
for the appliance to come to a standstill.
Disconnect the mains plug.
11. Rotate the universal mixer in an anti
clockwise direction and remove.
12. Rotate the lid in an anticlockwise direc
tion and remove.
13. Remove the universal blade and tool
holder.
14. Empty the container.
■ Clean all parts directly after use.
X "Cleaning and maintenance" see
page 14
Adding more ingredients
Caution!
Observe the maximum filling level. Finish
processing before the ingredients touch
the lid.
■ While the appliance is running, remove
the pusher and add the ingredients
through the feed chute.
■ To add large quantities or ingredients,
turn the rotary switch to y and wait for
the machine to come to a standstill.
■ Rotate the universal mixer in an anti
clockwise direction and remove.
■ Remove the lid.
■ Add the extra ingredients.
■ Attach the lid. Replace the universal
mixer. Continue processing your
ingredients.