Plugging In And Removing The Spray Clip For Naci Application - Dentsply Sirona Midwest E Pro Instrucciones De Uso

6604206.book Seite 37 Mittwoch, 30. November 2016 5:54 17
Operating Instructions Midwest E Pro / E Plus 5 Operation
5.3 Plugging in and removing the spray clip for NaCI
application
Attaching the spray clip
✔ The spray water supply at the motor or treatment center is turned off.
1. Plug the silicone hose (D) into the tubule on the spray clip for saline
solutions (B/C).
2. Attach the spray clip to the instrument.
Tip: Use the silicone disks (A), to hold back the cooling air emitted from
the instrument from the preparation site and to direct it away laterally.
Detaching the spray clip
1. Remove the spray clip from the instrument.
2. Flush the spray clip and silicone hose with clear water.
37
66 04 206 D3686.201.01.02.02