Safety Information - Harbor Breeze E-PAR52CB5C Manual Del Usuario

SAFETY INFORMATION

READ AND SAVE THESE INSTRUCTIONS
Please read and understand this entire manual before attempting to assemble, install or operate the product. If you
have any questions regarding the product, please call customer service at 1-800-527-1292, 8:30 a.m.-5:00 p.m.,
CST, Monday-Friday.
1. Before you begin installing the fan, disconnect the power by removing fuses or turning off circuit
2. CAUTION: Read all instructions and safety information before installing your new fan. Review the
accompanying assembly diagrams.
3. CAUTION: To avoid personal injury, the use of gloves may be necessary while handling fan parts with
sharp edges.
4. Make sure that all electrical connections comply with local codes, ordinances, the National Electrical Code and
ANSI/NFPA 70-1999. Hire a qualified electrician or consult a do-it-yourself wiring handbook, available at Lowe's, if
you are unfamiliar with installing electrical wiring.
5. Make sure the installation site you choose allows a minimum clearance
least 30 in. from the end of the blades to any obstruction.
6. WARNING: To reduce the risk of fire, electrical shock, or personal injury, mount fan to outlet box marked
"ACCEPTABLE FOR FAN SUPPORT OF 15.9 KG (35 LBS) OR LESS" and use mounting screws provided with the
outlet box. Most outlet boxes commonly used for the support of lighting fixtures are not acceptable for fan support
and may need to be replaced. Consult a qualified electrician if in doubt. Secure the outlet box directly to the building
structure. The outlet box and its support must be able to support the moving weight of the fan (at least 35 lbs.). Do
NOT use a plastic outlet box.
7. After you install the fan, make sure that all connections are secure to prevent the fan from falling.
8. WARNING: To reduce the risk of fire, electrical shock, or personal injury, wire connectors provided with this
fan are designed to accept only one 12 gauge house wire and two lead wires from the fan. If your house wire is
larger than 12 gauge or there is more than one house wire to connect to the two fan lead wires, consult an
electrician for the proper size wire connectors to use.
9. WARNING: To reduce the risk of fire or electrical shock, do not use the fan with any solid state speed
control device or control fan speed with a full range dimmer switch.
10. WARNING: To reduce the risk of fire, electrical shock, or personal injury, do not bend the blade arms when
installing them, balancing the blades, or cleaning the fan. Do not insert objects between the rotating fan blades.
11. DANGER: If using this fan in a DAMP location, this fan must be connected to a supply circuit that is
protected by a Ground Fault Circuit Interrupter (GFCI) to reduce the risk of personal injury, electrical shock or death.
12. WARNING: To reduce the risk of personal injury, use only parts provided with this fan. The use of parts
OTHER than those provided with this fan will void the warranty.
13. The net weight of this fan including the light kit is: 34.06 lbs. (15.45 kg).
of 7 feet from the blades to the floor and at
3
breakers.