Changing The Radio Channel - Auriol AHFL 433 B2 Instrucciones De Uso

Changing the radio channel

Changing the radio channel on the outdoor sensor
You can select between 3 radio channels. Channel 1 is preset.
♦ Open the battery compartment
ance by removing the battery compartment cover .
♦ Select a radio channel by pushing the channel selector
switch
♦ Press and hold the
flashes on the outdoor display .
♦ Press the TX button
radio signal. If reception is successful, the temperature and
humidity will now be displayed on the outdoor display
on the new radio channel.
♦ Close the battery compartment
AHFL 433 B2
to CH 1, CH 2 or CH 3.
button
to manually initiate the outdoor sensor
on the rear of the appli-
until the reception signal
again.
GB │ MT │
117 ■