TomTom Palm Manual De Instrucciones página 16

Putting maps on a blank expansion card
c. Select Remove maps and click the forward arrow.
d. Select the drive containing the card reader and click the forward
arrow. If only one option appears, simply click the arrow.
e. Select the map you want to remove, and click the forward arrow.
f. When the <name> map removed message appears, click the
arrow.
3
Do one of the following:
• To remove another map, select Remove maps, click the forward
arrow, and repeat steps 2d through 2f.
• When you have finished removing maps, click the back arrow to
return to the setup screen, select Quit, and click the arrow.
Putting maps on a blank expansion card
If you erase the included card in order to install multiple maps on it, or if you
want to install maps on a separately purchased high-capacity card, you must
install the NAVIGATOR software onto the erased or new card.
0the
1
Connect the card to your computer:
a. Insert the card reader included in this package into a powered USB
port on your computer.
b. Insert the blank expansion card into the card reader.
14 GPS Navigator