Weee Directive; Additional Information; Legal Limitations On The Usage Of Your Product And The Use Of Images; Laser Safety - Canon imageRUNNER 2204F Manual De Configuración

WEEE Directive

Only for European Union and EEA (Norway, Iceland and Liechtenstein)
These symbols indicate that this product is not to be disposed of with
your household waste, according to the WEEE Directive (2012/19/EU),
the Battery Directive (2006/66/EC) and/or national legislation
implementing those Directives.
If a chemical symbol is printed beneath the symbol shown above, in
accordance with the Battery Directive, this indicates that a heavy metal
(Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in this battery or
accumulator at a concentration above an applicable threshold specified
in the Battery Directive.
This product should be handed over to a designated collection point,
e.g., on an authorized one-for-one basis when you buy a new similar
product or to an authorized collection site for recycling waste electrical
and electronic equipment (EEE) and batteries and accumulators.
Improper handling of this type of waste could have a possible impact on
the environment and human health due to potentially hazardous
substances that are generally associated with EEE. Your cooperation in
the correct disposal of this product will contribute to the effective usage
of natural resources.
For more information about the recycling of this product, please contact
your local city office, waste authority, approved scheme or your
household waste disposal service or visit www.canon-europe.com/weee,
or www.canon-europe.com/battery.
Legal Limitations on the Usage of Your Product
and the Use of Images
Using your product to scan, print or otherwise reproduce certain
documents, and the use of such images as scanned, printed or otherwise
reproduced by your product, may be prohibited by law and may result in
criminal and/or civil liability. A non-exhaustive list of these documents is
set forth below. This list is intended to be a guide only. If you are
uncertain about the legality of using your product to scan, print or
otherwise reproduce any particular document, and/or of the use of the
images scanned, printed or otherwise reproduced, you should consult in
advance with your legal advisor for guidance.
ū Paper Money
ū Traveler's Checks
ū Money Orders
ū Food Stamps
ū Certificates of Deposit
ū Passports
ū Postage Stamps (canceled or uncanceled)
En
ū Immigration Papers
ū Identifying Badges or Insignias
ū Internal Revenue Stamps (canceled or uncanceled)
ū Selective Service or Draft Papers
ū Bonds or Other Certificates of Indebtedness
ū Checks or Drafts Issued by Governmental Agencies
ū Stock Certificates
ū Motor Vehicle Licenses and Certificates of Title
ū Copyrighted Works/Works of Art without Permission of Copyright
Owner

Laser Safety

This Product is certified as a Class 1 laser product under IEC60825-1:2007
and EN60825-1:2007. This means that the product does not produce
hazardous laser radiation.
Since radiation emitted inside the product is completely confined within
protective housings and external covers, the laser beam cannot escape
from the machine during any phase of user operation.
Do not remove protective housings or external covers, except as
directed by the equipment's manual.
This product includes laser diode.
[Maximum Output 8 mW, Wavelength 785-800 nm]
16

Additional Information

When servicing or adjusting the optical system of the product, be careful
not to place screwdrivers or other shiny objects in the path of the laser
beam.
Also, accessories such as watches and rings should be removed before
working on the product.
The reflected beam, even though visible or invisible, can permanently
damage your eyes.
This Product has been classified under IEC60825-1:2007 and EN60825-
1:2007, which conform to the following classes;
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL À LASER DE CLASSE 1
APPARECCHIO LASER DI CLASSE 1
PRODUCTO LÁSER DE CLASE 1
APARELHO A LASER DE CLASSE 1
LUOKAN 1 LASER-TUOTE
LASERPRODUKT KLASS 1
CAUTION
Use of controls, adjustments, or performance of procedures other than
those specified in the manuals for this machine may result in hazardous
radiation exposure.