Microwave Power Settings; Setting The Microwave; Microcombi Operation; Setting Microwave Combi Operation - Siemens HB84H501 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Ovenware test
Do not switch on the microwave unless there is food inside. The
following ovenware test is the only exception to this rule.
Perform the following test if you are unsure whether your
ovenware is suitable for use in the microwave:
Heat the empty ovenware at maximum power for ½ to
1.
1 minute.
Check the temperature occasionally during that time.
2.
The ovenware should still be cold or warm to the touch.
The ovenware is unsuitable if it becomes hot or sparks are
generated.

Microwave power settings

Use the button to set the desired microwave power.
90 W
for defrosting delicate foods
180 W
for defrosting and continued cooking
360 W
for cooking meat and heating delicate foods
600 W
for heating and cooking food
900 watts
for heating liquids
Notes
When you press a button, the selected power lights up.
The microwave power can be set to 900 watts for a
maximum of 30 minutes. With all other power settings a
maximum cooking time of 1 hour 30 minutes is possible.

Setting the microwave

Example: Microwave power setting 360 W, cooking time
17 minutes
Set the function selector to
1.

MicroCombi operation

This involves simultaneous operation of the grill and the
microwave. Using the microwave makes your dishes ready
more quickly, but they are still nicely browned.
You can switch on all microwave power settings.
Exception: 900 watts

Setting Microwave Combi operation

Example: microwave 360 W, 17 minutes and hot air
Set the type of heating using the function selector, and the
1.
temperature using the temperature selector.
Press the button for the microwave power setting you require.
2.
A suggested cooking time appears.
Use the
or
button to set the cooking time.
@
A
3.
Press the
button.
4.
Appliance operation begins. The cooking time starts counting
down.
The cooking time has elapsed
A signal sounds. Combination mode has finished. You can stop
the audible signal by pressing the
Opening the oven door during cooking
Operation is suspended. After closing the door, press the
button briefly. The programme will then continue.
34
ß
.
3
button.
0
Press the button for the microwave power setting you require.
2.
The button lights up and a suggested cooking time is
displayed.
Use the
@
or
3.
Press the
4.
Operation begins. The cooking time starts counting down in the
display.
The cooking time has elapsed
A signal sounds. Microwave operation has finished. Turn the
function selector to the zero position. You can stop the audible
signal by pressing the
Opening the oven door during operation
Operation is suspended. After closing the door, press the
button. Operation continues.
Changing the cooking time
This can be done at any time. Use the
the cooking time.
Changing the microwave power setting
Press the button for the new microwave power setting. Use
the
or
button to set the cooking time and restart the
@
A
microwave.
Cancelling operation
Press and hold the
turn the function selector to the zero position.
Notes
When you set the function selector to
microwave power setting always lights up as the proposed
setting.
If you open the appliance door during cooking, the fan may
continue to run.
Pausing operation
Press the
button briefly. The oven is paused. Press the
button again to continue operation.
Changing the cooking time
This can be done at any time. Use the
the cooking time.
190 °C.
Changing the microwave power setting
Press the button for the new microwave power setting. Use
the
or
button to set the cooking time and restart the
@
A
microwave.
Cancelling operation
Press and hold the
the function selector and temperature selector back to the zero
position.
A
button to set the cooking time.
button.
button.
0
or
@
button for approximately 4 seconds and
ß
or
@
button for approximately 4 seconds, turn
button to change
A
, the highest
button to change
A

Publicidad

Tabla de contenido
loading

Tabla de contenido