Setting The Cooking Time; Setting The Clock; Childproof Lock; Switching On The Childproof Lock - Siemens HB84H501 Instrucciones De Uso

in the foreground. The
S
and the timer can be seen counting down.
To check the timer,
S x
button repeatedly until the arrow points to the appropriate
0
symbol. The value is shown for a few seconds on the display.

Setting the cooking time

The cooking time for your meal can be set on the oven. When
the cooking time has elapsed, the oven switches itself off
automatically. This means that you do not have to interrupt
other work to switch off the oven. The cooking time cannot be
accidentally exceeded.
Example in the diagram: Cooking time 45 minutes.
Use the function selector to set the type of heating.
1.
Use the temperature selector to set the temperature or grill
2.
setting.
Press the 0 button twice.
3.
20:00 is shown in the display. The time symbols light up and
the arrow is next to
N x
Use the or button to set the cooking time.
@ A
4.
Press the † button.
5.

Childproof lock

The oven has a childproof lock to prevent children switching it
on accidentally.
The oven will not react to any settings. The timer and clock can
also be set when the childproof lock has been switched on.

Switching on the childproof lock

Requirement: No cooking time should be set and the function
selector is in the off position.
Press and hold the button for approx. four seconds.
h
The symbol appears in the display. The childproof lock is
@
activated.
symbol is preceded by the
cooking time or clock, press the
0
.
arrow The oven starts. The cooking time counts down in the display
N
and the
Nx
The cooking time has elapsed
An audible signal sounds. The oven stops heating. 0:00 is
shown in the display. Press the
stops. Turn the function selector to the off position. The oven is
switched off.
Cancelling the cooking time
Use the A button to reset the cooking time to 0:00. After a few
seconds, the change is adopted. The cooking time is
cancelled. If the timer has been set, press the
beforehand.
Checking the time settings
If several time-setting options are set, the corresponding
symbols are illuminated on the display. The
the symbol for time function which is currently visible on the
display.
To check the
button repeatedly until the
0
symbol. The display shows the value for a few seconds.

Setting the clock

When the appliance has been connected to the power supply,
or after a power cut, the
in the display. Set the clock.
Press the
1.
Default value
Default value
Use the
@
2.
Press the
3.
Changing the clock
Prerequisite: your appliance must be switched off.
Press the
1.
The time symbols light up in the display, the
to the
0
Use the @
2.
After a few seconds, the time that has been set is adopted.
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings.

Switching off the childproof lock

Press and hold the
The symbol on the display goes out. The childproof lock is
@
deactivated.

Childproof lock with automatic programmes

When automatic programmes have been set, the childproof
lock is not operational.
symbol lights up. The other time symbols go out.
0 button. The audible signal
timer, cooking time or
V x
arrow points to the appropriate
N
symbols and three zeros light up
N0
@ or A button.
: 12:00
@
23:59
A
or button to set the clock.
A
0 button. The time is set.
button twice.
0
symbol.
or A button to change the clock.
button for approx. four seconds.
h
0 button
N arrow is next to
clock, press the
0
N arrow is next
37