Fronius TransSteel 2200 Guia De Inicio Rapido página 5

STICK
1 2
4 5
7 8
/ Perfect Welding / Solar Energy / Perfect Charging
TransSteel 2200c
Quick Guide to synergic welding
SAFETY
Before working with the device, ensure that you have read and understood all the documents provided in hard copy and online.
This document does not describe all the functions of the device. For a complete description of the device, refer to the Operating Instructions.
1 Set the synergic welding process 2 Set the filler metal and shielding gas 3 Set the operating mode
When setting a welding power parameter, the 2-step mode: short weld seams, tacking work
remaining parameters are set automatically 4-step mode: longer weld seams, high level of
MMA welding comfort
TIG welding Special 4-step mode: additional settings for start-
The welding power parameters can be adjusted 1 . 2 . 3 .
individually Spot welding: for overlapping sheets / stitch
welding: light-gauge sheet welding and air-gap
bridging
4 6
Set the welding power 5 Adjust the parameters for correction Optimise welding results
Sheet thickness Arc length correction 1. Measure the welding circuit resistance r
2. Set optimal mains fuse protection (FUS parameter in
Welding current Welding voltage level 2 of the Setup menu)
Wire speed Arc-force dynamic
The description of the aforementioned measures can be
found in the Operating Instructions of the power source
select desired parameter select desired parameter
set desired parameter set desired parameter
Operating Instructions:
www.fronius.com/transsteel
www.fronius.com/transsteel-manuals
42,0426,0263,EN 001-19042017
3 1
6 4
2 3
5 6