Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Section
Built-in CD Player
05
Playing a CD
1
1 Track number indicator
Shows the track currently playing.
2 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
1
Insert a CD into the CD loading slot.
Playback will automatically start.
CD loading slot
# You can eject a CD by pressing CD EJECT.
2
After a CD has been inserted, press
SOURCE to select the built-in CD player.
3
Use VOLUME to adjust the sound level.
When you press VOLUME up/+, the volume is
raised and when pressed down/, the volume
is lowered.
4
To perform fast forward or reverse,
press and hold c or d.
5
To skip back or forward to another
track, press c or d.
Pressing d skips to the start of the next track.
Pressing c once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
10
En
HHHHHHHHHHHHHH
! The built-in CD player plays one, standard, 12-
! Do not insert anything other than a CD into
2
! If you cannot insert a disc completely or if
! If the built-in CD player does not operate prop-
Playing tracks in a random
order
Random play lets you play back tracks on the
CD in a random order.
1
RDM appears in the display. Tracks will play in
a random order.
2
Tracks will continue to play in order.
Repeating play
Repeat play lets you hear the same track over
again.
1
RPT appears in the display. The track currently
playing will play and then repeat.
Notes
cm or 8-cm (single) CD at a time. Do not use
an adapter when playing 8-cm CDs.
the CD loading slot.
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press CD EJECT to eject the disc, and check
the disc for damage before inserting the disc
again.
erly, an error message such as ERROR-11
may be displayed. Refer to Understanding
built-in CD player error messages on page
17.
Press 4 to turn random play on.
Press 4 to turn random play off.
Press 5 to turn repeat play on.
Publicidad
Capítulos
Tabla de contenido
