Duplex Printing - Kyocera DU-31 Instrucciones

Duplex Printing

After the duplexer is installed, the duplex printing menu is added to the printer's
mode selection menu as shown below (added menu enclosed in frame), and it is
used to switch the duplex printing mode on/off and to set the orientation for duplex
printing.
Mode selection menu
Ready
PAR 600 A4 001
Paper handling >
Duplex mode
None
Short edge bind
Long edge bind
The duplex printing mode is explained on the following pages.
(FS-7000 only)
Ready
PAR 600 A4 001
Interface >
Parallel
Paper type
Normal
Duplex mode
None
Short edge bind
Long edge bind
Others >
9