Installing The Duplexer - Kyocera DU-31 Instrucciones

Installing the Duplexer

Open the front cover of the printer, and install the DU-31 in the vacant space below
the transfer unit.
CAUTION
Before installing (or removing) the optional duplexer, be sure
to turn off the printer's power and disconnect the power cord
plug from the AC outlet.
1.
Open the printer's front cover.
Front cover
2.
After removing the duplexer from the packing materials, remove the
adhesive tape holding the cover in place.
Tape
Installation space for the
DU-31
Tape
7