Parts Included; Special Tools Needed - Johnson Controls M9310 Serie Instrucciones De Instalación

Installation

Parts Included

• M9310 Series actuator
Figure 1: M9310 Actuator
• anti-rotation bracket
Figure 2: Anti-Rotation Bracket
• M3.5 x 9.5 mm long self-tapping crossed recessed
screw
Figure 3: Self-Tapping Screw
Figure 3: Recessed Screw

Special Tools Needed

• torque wrench with 12 point 3/8 in. or 5/16 in.
open-end wrench
M9310 Series Electric Non-Spring Return Actuators Installation Instructions
• 5/16 in. screwdriver
• digital voltmeter or M9000-200 commissioning tool
(when zero and span need adjustment)
Accessories
Table 1: Accessories (Order Separately)
Code Number
M9000-200
M9000-321
M9300-1
M9300-2
M9300-100
M9300-140
M9300-151
M9300-1K
M9300-2K
M9300-10K
Mounting
Figure 4: Mounting Positions
2
Description
Commissioning Tool That Provides
a Control Signal to Drive 24 V
On/Off, Floating, Proportional, and
Resistive Electric Actuators
Weathershield Kit
Auxiliary Switch Kit (Single-Pole,
Double-Throw)
Auxiliary Switch Kit (Two Single-
Pole, Double-Throw)
Threaded Conduit Adapters for
1/2 in. electrician's fittings
Feedback Potentiometer 140k
ohms
Remote Mounting Kit, with Crank
Arm and Damper Linkage
Feedback Potentiometer 1k ohms
Feedback Potentiometer 2k ohms
Feedback Potentiometer 10k ohms