AMATECH F-91501 Instrucciones De Uso página 17

INSTRUCTIONS FOR USE
12. Adjust width of support bar as needed until second rail clamp mount is correctly
aligned with second rail clamp. As shown in step 11 figure.
13. Lower rail clamp mount onto rail clamp. Rail clamp mount should slide over rail
clamp. Do NOT force. Rail clamp mount is not installed properly until green is
visible through indicator slot and pin is flush with top (both circled). As shown in
figure 12.
14. Ensure there is No Gap between the
Beach Chair and the OR table pad.
Ensure blue foam roll is hanging below
the Beach Chair.
Document Number:80028269
Version: C
Page 17
Issue Date: 31 MAR 2020
Ref Blank Template: 80025118 Ver. E