Fein MShyo869-1d Instrucciones De Uso página 10

OBJ_BUCH-0000000344-001.book Page 10 Tuesday, February 11, 2020 11:46 AM
en
10
Extension cable.
If the use of an extension cord
WARNING
is required, its length and con-
ductor cross-section must be adequate for the
application in order to prevent a voltage drop
in the extension cord, power loss and over-
heating of the power tool. Otherwise, the
extension cable and power tool are prone to
electrical danger, and the working efficiency is
decreased.
Intended use of the power tool:
MSho852-1 (**), MShyo852-3a (**),
MShyo852-4a (**)
hand-guided straight grinder for dry grinding
of metal with double-sided conical grinding
wheels (form 4) in weather-protected envi-
ronments with the accessories recommended
by FEIN.
Symbols.
Symbol, character Explanation
General prohibition sign. This action is prohibited.
Do not touch the rotating parts of the power tool.
Observe the instructions in the text or graphic opposite!
Make sure to read the enclosed documents such as the Instruction Man-
ual and the General Safety Instructions.
Before commencing this working step, pull the power plug out of the
socket. Otherwise there will be danger of injury if the power tool
should start unintentionally.
Use eye protection during operation.
Use ear protection during operation.
Use a dust mask during operation.
Use protective gloves during operation.
A surface that can be touched may be very hot and thus hazardous.
Switching on
Recommended dimensions of extension
cables at an operating voltage of 120 V – sin-
gle-phase a. c., with only one power tool
MSf (**), MSfo (**), MSfov (**) connected:
Max. cable length, ft Max. cable length, m
≤ 100 100 200
–200 –300
Min. conductor size Min. conductorcross-
A.W.G. section, mm
16 14 12
MShyo869-1a (**), MShyo869-1b (**),
MShyo869-1d (**)
Hand-guided straight grinder for dry grinding
of metal with straight grinding wheels
(form 1) in weather-protected environments
with the accessories recommended by FEIN.
≤ 30 30 60
– 60 –100
2
1.5 2.5 4.0