Publicidad
Idiomas disponibles
Idiomas disponibles
OBJ_BUCH-0000000344-001.book Page 15 Tuesday, February 11, 2020 11:46 AM
Adjustments.
Before mounting or replacing cutting tool or accessories, pull the power plug.
WARNING
This preventive safety measure rules out the danger of injuries through acciden-
tal starting of the power tool.
Adjusting the wheel guard (figure 3).
Loosen the clamping screw.
Turn the wheel guard to the required work-
ing position.
Tighten the clamping screw.
Fig. 3
Wheel guard
Clamping screw
en
15
Publicidad
