Fein MShyo869-1d Instrucciones De Uso página 14

OBJ_BUCH-0000000344-001.book Page 14 Tuesday, February 11, 2020 11:46 AM
en
14
Assembly instructions.
Before mounting or replacing cutting tool or accessories, pull the power plug.
WARNING
This preventive safety measure rules out the danger of injuries through acci-
dental starting of the power tool.
Connecting to the power supply.
The power tool is provided ex works without
a plug.
Recommendation: As a protective measure
against overload, equip the power tool with a
matching FEIN motor-protection plug.
The plug is to be installed by a
WARNING
qualified electrician.
Before starting operation,
WARNING
check the rotation direction of
the output shaft without a grinding accessory
mounted, and have it corrected if required.
The rotation direction is marked on the
power tool with an arrow.
The output voltage and fre-
WARNING
quency of the power supply
must correspond with the data on the type
plate of the power tool.
Using FEIN frequency converters ensures
reliable operation of the power tool.
Follow the steps in the operating instruc-
tions of the frequency converter.