Parker Chelsea URP50 El Manual Del Propietario página 12

Bulletin HY25-1793-M1/US
Installation
Tank Installation Instructions
6. Slide a .562 I.D. 1.375 O.D. washer (4) and then a hold down
bracket (5) on the .500"- 13 x 3.000" capscrew (3). Install this
into the recessed pocket on the tank and the capscrew through
the hole in the mounting base.
13
7. From the bottom side slide the Mounting spacer (13), washer
(4) and .500" locknut (6) to the bolt assembly.
8. Install the reducer bushing and return line diffuser into the work
parts. A thread sealant is recommended. DO NOT use pipe
thread tape. The reducer bushing and return line diffuser can
be fitted into either port for ease of installation.
3
4
5
4
6
Owner's Manual
URP50 Tank
8
Parker Hannifin Corporation
Chelsea Products Division
Olive Branch, MS 38654 USA