Kit Assembly - Metra 99-7362B Instrucciones De Instalación

ISO DIN radio provision
with pocket
1. Mount the radio brackets to the
pocket with the (4) #8 x 3/8"
Phillips screws supplied. (Figure A)
2. Mount the radio to the bracket/
pocket assembly with the screws
included with the radio. (Figure B)
3. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from Metra
and/or AXXESS.
4. Mount assembly into the sub dash.
(Figure C)
5. Reassemble dash in reverse order
of disassembly using 99-7362B
trim panel instead of factory panel.
(Figure C)

Kit Assembly

(Figure A)
99-7362B
(Figure B)
3
(Figure C)