Intended Use; Items Supplied - Hilti PM 30-MG Manual De Instrucciones Original

Ocultar thumbs Ver también para PM 30-MG:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 45
3
Description
3.1
Product overview
3.2

Intended use

This tool is a self-leveling multi-line laser level that allows a single person to transfer right angles, level
horizontally, carry out alignment work and plumb accurately.
The product has three green 360° laser lines, a reference point directed downward on the right-hand front
of the measuring device, as well as four beam intersection points (front, back, left, right and above) with a
range of approx. 20 m. Range depends on the brightness of ambient light.
The product is designed for mainly indoor use and is no substitute for a rotating laser. If used for outdoor
applications, care must be taken to ensure that the conditions are the same as for indoor applications. If this
is not the case, the Hilti PMA 31G laser receiver should be used.
Possible applications are:
Marking the position of partition walls (at right angles and in the vertical plane).
Checking and transferring right angles.
Aligning components to be installed or sections of a structure in three axes.
Transferring points marked on the floor to the ceiling.
The laser lines can be switched on either separately (vertical or horizontal line only) or together. When used
with inclination angle, the pendulum for self-leveling is blocked.
▶ Use only Hilti Li­ion batteries of the B 12 series with this product.
▶ Use only the Hilti C4/12-50 charger to charge these batteries.
3.3
Features
The product is self-leveling to within typically approx. 4.0° in all directions. Self-leveling time is about 3
seconds.
When the self-leveling range is exceeded, the laser beams blink as a warning.
When switched on, the product defaults to visibility mode with high line brightness. Horizontal and vertical
lines can be switched on and off with the line mode button. To use the PMA 31G laser receiver, activate
receiver mode by pressing the receiver mode button.
3.4

Items supplied

Multi-line laser, magnetic holder, wall-mount holder, retaining strap, case, manufacturer's certificate.
14
English
Printed: 08.05.2019 | Doc-Nr: PUB / 5492771 / 000 / 00
1
Line mode button
@
Li­ion battery
;
Warning sticker
=
Receiver mode button
%
Battery state of charge indicator
&
Laser exit window
(
Selector switch for ON / OFF and lock / un-
)
lock pendulum
Knob for fine adjustment
+
2243556
*2243556*

Publicidad

Tabla de contenido
loading

Tabla de contenido