Technical Data; Definitions: Safety Guidelines; English (Original Instructions) - DeWalt DWE550 Traducido De Las Instrucciones Originales

165 mm CIRCULAR SAW, DWE550
184 mm CIRCULAR SAW, DWE560
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
UK & Ireland
Type
Power input
No-load speed
Blade diameter
Maximum depth of cut at
90°
45°
Blade bore
Bevel angle adjustment
Weight
Noise values and/or vibration values (triax vector sum) according to EN62841:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound
level)
Cutting wood
Vibration emission value a =
h,W
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
WALT one of the
e
DWE550 DWE560
V 230 230
AC
V 230/115 230/115
AC
1 1
W 1200 1350
-1
min 5500 5500
mm 165 184
mm 55 65
mm 35 42
mm 20 16
48˚ 48˚
kg 3.60 3.66
dB(A) 93 93
dB(A) 104 104
dB(A) 3 3
m/s 2 <2.5 <2.5
m/s 2 1.5 1.5
hands warm (relevant for vibration), organisation of
work patterns.
EC-Declaration of Conformity
Machinery Directive
Circular Saw
DWE550, DWE560
D WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN62841-1:2015, EN62841-2-5:2014.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice President of Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
16.08.2017
WARNING: To reduce the risk of injury, read the
instruction manual.

Definitions: Safety Guidelines

The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.

Denotes risk of electric shock.

Denotes risk of fire.
EngLIsh
WALT at
e
WALT.
e
25