Cisco Catalyst 9400 Serie Manual Del Usuario página 10

Regulatory Compliance and Safety Information Regulatory Compliance & Safety Information for Cisco Catalyst 9400 Series Switches
Statement 256 Class A Warning for Hungary
Warning
This equipment is a class A product and should be used and installed properly according to the
Hungarian EMC Class A requirements (MSZEN55022). Class A equipment is designed for typical
commercial establishments for which special conditions of installation and protection distance
are used.
Statement 263 Fan Warning
Warning
The fans might still be turning when you remove the fan assembly from the chassis. Keep fingers,
screwdrivers, and other objects away from the openings in the fan assembly's housing.
Statement 294 Class A Warning for Korea
Warning
This is a Class A Device and is registered for EMC requirements for industrial use. The seller or
buyer should be aware of this. If this type was sold or purchased by mistake, it should be replaced
with a residential-use type.
Statement 328 Main Ground Connection Warning
Warning For Nordic countries (Norway, Finland, Sweden and Denmark) this system must be installed in
a Restricted Access Location, where the voltage of the main ground connection of all equipment
is the same (equipotential earth) and the system is connected to a grounded electrical outlet.
Statement 371 Power Cable and AC Adapter
Warning When installing the product, please use the provided or designated connection cables/power
cables/AC adaptors/batteries. Using any other cables/adaptors could cause a malfunction or a
fire. Electrical Appliance and Material Safety Law prohibits the use of UL-certified cables (that
have the "UL" or "CSA" shown on the cord), not regulated with the subject law by showing "PSE"
on the cord, for any other electrical devices than products designated by CISCO.
Regulatory Compliance and Safety Information Regulatory Compliance & Safety Information for Cisco Catalyst 9400
Series Switches
4