Cisco Catalyst 9400 Serie Manual Del Usuario página 13

Regulatory Compliance and Safety Information Regulatory Compliance & Safety Information for Cisco Catalyst 9400 Series Switches
Statement 1017 Restricted Area
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1018 Supply Circuit
Warning
Take care when connecting units to the supply circuit so that wiring is not overloaded.
Statement 1019 Main Disconnecting Device
Warning
The plug-socket combination must be accessible at all times, because it serves as the main
disconnecting device.
Statement 1021 SELV Circuit
Warning To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to
telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain
TNV circuits. Some LAN and WAN ports both use RJ-45 connectors. Use caution when connecting
cables.
Statement 1022 Disconnect Device
Warning
A readily accessible two-poled disconnect device must be incorporated in the fixed wiring.
Regulatory Compliance and Safety Information Regulatory Compliance & Safety Information for Cisco Catalyst 9400
Series Switches
7