Cisco Catalyst 9400 Serie Manual Del Usuario página 12

Regulatory Compliance and Safety Information Regulatory Compliance & Safety Information for Cisco Catalyst 9400 Series Switches
Statement 1006 Chassis Warning for Rack-Mounting
and Servicing
Warning To prevent bodily injury when mounting or servicing this unit in a rack, you must take special
precautions to ensure that the system remains stable. The following guidelines are provided to
ensure your safety:
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or
Statement 1007 TN and IT Power Systems
Warning
This equipment has been designed for connection to TN and IT power systems.
Statement 1008 Class 1 Laser Product
Warning
Class 1 laser product.
Statement 1015 Battery Handling
Warning
There is the danger of explosion if the battery is replaced incorrectly. Replace the battery only
with the same or equivalent type recommended by the manufacturer. Dispose of used batteries
according to the manufacturer's instructions.
Regulatory Compliance and Safety Information Regulatory Compliance & Safety Information for Cisco Catalyst 9400
Series Switches
6
with the heaviest component at the bottom of the rack.
servicing the unit in the rack.