Instructions For Use; Preselecting The Speed - Flex XFE 7-15 125 Instrucciones De Funcionamiento Originales

Instructions for use

WARNING!
Before carrying out any work on the
polisher, always pull out the mains plug.
Before switching on the polisher
Unpack the polisher and check that there
are no missing or damaged parts.
Attach or change tools
Pull out the mains plug.

Firmly press polishing tool, centred on

the eye, onto the Velcro pad (8). Use
undamaged polishing tools only.
Insert the mains plug into the socket.

Switch on the polisher (without engaging

it) and run the polisher for approx. 30
seconds. Check for imbalances and
vibrations.
Switch off the polisher.

Switch on and off
Brief operation without engaged switch
rocker
Press and hold down the switch.

To switch off, release the switch.

18
XFE 7-15 125 / XFE 7-15 150 / XCE 10-8 125
Continuous operation with engaged
switch rocker
NOTE
The electric power tool features a starter
interlock. In other words, the electric power
tool will not start running again if still swit
ched on after a power failure.
Switching on electric power tool after
a power failure
– Switch off the electric power tool.
– Switch on the electric power tool again.
Press and hold down the switch.

To lock into position, hold down the

locking button and release the switch.
To switch off, briefly press and release

the switch.

Preselecting the speed

-