Instructions For Use - Flex LD 18-7 125 Instrucciones De Funcionamiento Originales

Instructions for use

Before switching on the power
tool
 Unpack power tool and accessories
and check that no parts are missing
or damaged.
Attaching/changing the auxiliary
handle
t^okfkd>
_ÉÑçêÉ=éÉêÑçêãáåÖ=~åó=ïçêâ=çå=íÜÉ=ÉäÉÅíêáÅ=
éçïÉê=íççäI=éìää=çìí=íÜÉ=ã~áåë=éäìÖK
fí=áë=åçí=éÉêãáííÉÇ=íç=çéÉê~íÉ=íÜÉ=ÉäÉÅíêáÅ=
éçïÉê=íççä=ïáíÜçìí=íÜÉ=~íí~ÅÜÉÇ=~ìñáäá~êó=
Ü~åÇäÉK
 Loosen and remove 2 screws (WAF 13).
 Push grip over the gear head (1.).
To enable to use the electric power tool
without tiring and to control it safely,
attach the grip as follows:
– For right-handed people:
Threaded insert on right
– For left-handed people:
Threaded insert on left
 Insert and tighten 2 screws (2.).
20
Inserting and changing the
sanding tools
t^okfkd>
_ÉÑçêÉ=éÉêÑçêãáåÖ=~åó=ïçêâ=çå=íÜÉ=ÉäÉÅíêáÅ=
éçïÉê=íççäI=éìää=çìí=íÜÉ=ã~áåë=éäìÖK
 Press and hold down the spindle lock (1.).
 Using the stop key, loosen the clamping
nut on the spindle in an anti-clockwise
direction and remove (2.).
 Insert diamond sanding pad (A) correctly.
 Screw the clamping nut (B), with flange
face up, onto the spindle.
 Press and hold down the spindle lock.
 Tighten the clamping nut with the stop
key.
LD 18-7 125