Instructions For Use - Flex WST 1000 FV Instrucciones De Funcionamiento Originales

Instructions for use

Before switching on the power tool
 Unpack power tool and accessories
and check that no parts are missing
or damaged.
Attaching/changing the
sanding head
`^rqflk>
_ÉÑçêÉ=éÉêÑçêãáåÖ=~åó=ïçêâ=çå=íÜÉ=ÉäÉÅíêáÅ=
éçïÉê=íççäI=éìää=çìí=íÜÉ=ã~áåë=éäìÖK
To attach:
 Press the two locks on the tool change
head (1.).
 Put the tool change head on the sanding
head (2.). Rotate sanding head until it
engages. The locks move back to their
original position.
20
To change:
 Press the two locks on the tool change
head (1.) and remove sanding head (2.).
Attaching and changing
the sanding tools
`^rqflk>
_ÉÑçêÉ=éÉêÑçêãáåÖ=~åó=ïçêâ=çå=íÜÉ=ÉäÉÅíêáÅ=
éçïÉê=íççäI=éìää=çìí=íÜÉ=ã~áåë=éäìÖK
 Lift up the lock on the FixTec clamping
nut (1.). Loosen clamping nut by turning
it anti-clockwise (2.).
 Attach/change diamond sanding pad.
 Tighten FixTec clamping nut and fold
down lock.
WST 1000 FV