Tabla de contenido
Publicidad
USB Interface
The USB interface is used for communication with a PC. Use Power Log
software (included) to download and analyze logged data. This interface is also
used for updating firmware using the 1735 Upgrade Utility. Refer to
"Installing the USB Driver".
Maintenance
To prevent possible electric shock or personal injury,
maintenance work must be done only by qualified
service personnel.
When used correctly, the Logger requires very little maintenance. If necessary,
see
www.fluke.com
Centers worldwide. As an additional service, Fluke offers regular examination
and calibration of the Logger.
Cleaning
To prevent damage to the Logger, do not use abrasives or
solvents on this instrument.
Periodically clean the Logger by wiping it with a damp cloth, mild soap may
be used.
Storage
The battery should be charged at least once every six months when the Logger
is stored or not used over long periods.
Measuring Functions
Overview
The following information provides an overview of each rotary switch
position.
Meter Volts / Amps / Hz
This function displays the voltage and current values at the same time, plus the
frequency and the neutral-conductor current. You can also use this measuring
XW Warnings
for locations and contact information of Fluke Service
WCaution
Power Logger
Maintenance
9
Publicidad
Tabla de contenido
