Volts / Amps / Hertz; Logging - Fluke 1735 Manual De Instrucciones

Volts / Amps / Hertz

Select Meter with the rotary switch.
In this mode you can measure values for each phase (A, B, C) of
•
Voltage (V)
•
Current (I)
•
Frequency (F)
•
Neutral-conductor current (In)
You can determine and store the values. It is also possible to log the values
with the logging function.
Measurement or calculation of the neutral-conductor current is optional.

Logging

In Logging mode, the following values are recorded for every phase (A, B, C)
•
Voltage (V) and
•
Current (I) and the value of the
•
Frequency (F)
These values can be recorded in the instrument, downloaded and evaluated
with Power Log software.
Power Logger
Measuring Functions
17