geberit EFP 202 Instrucciones De Servicio página 20

EN
Operation
Inserting the Geberit pressing jaw or Geberit adapter jaw
Prerequisites
Pressing tool is de-energised.
WARNING
Danger of crushing by exposed parts
Do not hold any parts of your body or other objects in between the pressing jaws
Keep your fingers away from the roller range if there is no pressing jaw inserted
CAUTION
Damage to the device caused by incompletely locked retaining pin
Push the retaining pin in completely and lock it
1
Rotate the retaining pin by 180° to the front and pull it out (see cover page in the front,
figure A).
2
Insert the pressing jaw or adapter jaw in the pressing tool (see cover page in the front,
figure B).
3
Push the retaining pin in until the stop position is reached and rotate it by 180° to the
rear (see cover page in the front, figure C).
20
B966-003 © 05-2015
965.596.00.0 (02)