Sauder 109872 Manual Del Usuario página 33

15
109843
Executive Desk
1- -1/2" FLAT HEAD SCREW (Y)
(3 used in this step)
- With someone's help, carefully position the 109872 U- -Shaped Connector Kit next to the 109843 Executive Desk as
shown in the diagram.
- Fasten both CONNECTOR PLATES (O) to the bottom of the MOLDINGS on the U- -Shaped Connector Kit
and Desk. Use eight 9/16" LARGE HEAD SCREWS (BB) through each PLATE and into the pre- -drilled holes
in the MOLDINGS.
- Now, fasten the MODESTY PANEL (F) to the Inner End on the Desk. Use three 1- -1/2" FLAT HEAD
SCREWS (Y) with WASHERS (V) through the holes in the MODESTY PANEL and into the pre- -drilled
holes in the Inner End on the Desk.
IMPORTANT: The 109872 U- -Shape Connector Kit must be attached to the 109843 Executive Desk as
indicated in this step.
RETURN KITS ON RIGHT
MODESTY
PANEL (F)
Fasten the MODESTY PANEL (F)
along this edge of the Inner End
on the 109843 Executive Desk
using three 1- -1/2" FLAT HEAD
SCREWS (Y) and WASHERS (V).
WASHER (V)
(3 used in this step)
www.sauder.com/services
CONNECTOR
PLATE (O)
TOP (E)
109872
U- -Shape
Connector Kit
9/16" LARGE HEAD SCREW (BB)
(16 used for the PLATES)
109872