Rear Panel; Auto Standby Function - Pioneer VSX-828-K Manual Del Usuario

Rear panel

1 Power Indicator
When the power is turned ON, the indicator
changes from flashing to steadily lighted
blue. In the standby mode, the indicator
lights red.
• The power is still supplied even when the
power indicator is off. The power plug
(interrupter) must be unplugged in order to
completely cut the power supply. When not
using this product for long periods of time,
such as when traveling, unplug the power
cord (interrupter) from the power outlet for
safety purposes. Failure to do so could lead
to fire.
2 Volume knob (MIN/MAX)
• Sets the subwoofer volume.
• With this unit, the bass level can be
independently set, so do not turn up the
bass on the receiver.
• The volume knob is factory set at the MIN
position.
3 Line Level Input terminal (LINE IN)
4 Auto Standby switch (AUTO STANDBY)
• Turning the Auto Standby function on or
off.
• The default setting for AUTO STANDBY
switch is ON.
2
MIN MAX
3
LINE IN
4
ON
AUTO STANDBY
5
ON
POWER
6
AC IN

Auto standby function

When there is no (or only very weak) input
signal for a period of about ten minutes, the
power mode automatically changes to
standby (power indicator lights red). The
power automatically turns on when a signal is
input. The auto standby function is
deactivated when AUTO STANDBY switch is
set to OFF.
• There may be cases where a connected
component outputs noise or some other
non-audio signal which causes the
subwoofer to automatically power on when
in Auto Standby mode. If this happens,
switch off the Auto Standby mode and
switch the subwoofer on/off manually.
5 Power switch (POWER)
• Switches the subwoofer between ON
and OFF.
6 AC IN
• Connect the power cord to a AC socket.
Connection
Before making or changing the
connections, switch off the power and
disconnect the power cord from the AC
outlet.
Line level connection
Supplied RCA plug cord
Rear Panel
Connect the set's LINE IN terminal to the
receiver's SUBWOOFER PREOUT terminal
using the included RCA plug cord.
• When connected to the PREOUT terminal
for surround center channel on the
receiver, the bass is heard only on the
center channel, so it will be insufficient.
9
En