Embedded Web Server - Custom TK302-TF Guia Operativa

Tabla de contenido

Publicidad

EMBEDDED WEB SERVER

Web server interno
Printers are equipped with an Embedded Web Server that
allows to execute some operations on printers, through a
clear web interface, including:
monitoring the printer status;
setting operating parameters;
confi guring network settings;
managing the logos;
confi guring the email service to make diagnostics and
maintenance operations easier;
download printing drivers.
Before entering in the Embedded Web Server, check that:
the printer is connected and turned on;
the printer has a network connection based on the IP
protocol;
the following ports are opened (if a Firewall is present
on computer): 9100 (or alternatively set up). 15000,
15001, 15002;
have a Web browser on the computer;
the printer is connected to the network and its IP
address and its Subnet Mask are set up in a correct
way.
To check the setting of these parameters, open a new
terminal window and type "ping" on the command bar
followed by the IP address of the printer. The follow-
ing picture shows an example of a positive result after
the "ping" command.
Otherwise, if connection isn't possible, to its IP ad-
dress, a failure notice will appear.
Example:
ping
Command Prompt
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\>ping 192.168.10.27
Pinging 192.168.10.37 with 32 bytes of data:
Replay from 192.168.10.37: bytes=32 time<1mx TTl=64
Replay from 192.168.10.37: bytes=32 time<1mx TTl=64
Replay from 192.168.10.37: bytes=32 time<1mx TTl=64
Replay from 192.168.10.37: bytes=32 time<1mx TTl=64
Ping statistics for 192.168.10.37:
Packets: sent = 4, Received = 4, Lost = 0 (0% loss.),
Approximate round trip times in milli-seconds:
minimum = 0ms, Maximum = 0ms, Avereage = 0ms
c:\>
192. 168. 10. 37
37
ADVANCED FUNCTIONS
Le stampanti sono dotate di un Web Server interno che
permette, tramite una semplice interfaccia Web, di ese-
guire sulla stampante alcune attività tra cui:
monitorare lo stato della stampante;
confi gurare i parametri di funzionamento;
confi gurare i parametri di rete;
gestire i loghi e i font memorizzati nella stampante;
confi gurare il servizio di invio email per semplifi care le
operazioni di diagnostica e manutenzione;
scaricare i drivers di stampa.
Prima di accedere al Web Server interno accertarsi che:
la stampante sia collegata e accesa;
la stampante disponga di una connessione in rete
basata sul protocollo IP;
siano aperte da Firewall (se presente) le seguen-
ti porte: 9100 (o diversamente impostata). 15000,
15001, 15002;
disporre sul computer di un browser Web;
la stampante sia collegata alla rete e che l'indirizzo IP
e la Subnet Mask assegnati ad essa, siano impostati
correttamente. Per eseguire una verifi ca immediata
del settaggio di questi parametri lanciare dal sistema
operativo la fi nestra del terminale testuale e sulla
linea comandi digitare "ping" seguito dall'indirizzo
IP della stampante. Nella schermata riportata nella
fi gura seguente, viene mostrato un esempio di esito
positivo dopo il lancio del comando "ping". Se invece
non si riesce ad eseguire la connessione all'indirizzo
IP specifi cato, viene riportato un errore di richiesta
scaduta.
Esempio:
ping
192. 168. 10. 37

Publicidad

Tabla de contenido
loading

Tabla de contenido