Festo CPX-CEC-C1 Manual De Instrucciones página 21

3.3 Setting the RUN/STOP rotary switch
Note
Leave the RUN/STOP rotary switch at position 0"
(STOP) during installation.
Setting
0 = STOP
CPX−CEC−C1 stopped. The STOP LED lights up
yellow.
1 F = RUN
CPX−CEC−C1 started. The RUN LED lights up
green.
The switch settings are transferred to the controller as inputs, where
they can be evaluated.
Festo P.BE−K−CPX−CEC 0907NH English
Rotary switch
21