Installation Instructions - Festo CPX-CEC-C1 Manual De Instrucciones

3

Installation instructions

Warning
Before carrying out installation and maintenance work,
switch off the following:
If applicable, the compressed air supply
The operating voltage supply for the electronics/sen
sors
The load voltage supply for the outputs/valves
3.1 Mounting/Dismounting
The CoDeSys controller CPX−CEC−C1 is mounted in an inter
linking block of the CPX terminal.
1
Screws,
tightening torque
0.9 1.1 Nm
2
CPX−CEC−C1
3
Contact rails
4
Interlinking block
(any, example
shown without
supply)
18 Festo P.BE−K−CPX−CEC 0907NH English
1
2
3
4