Tabla de contenido
Publicidad
HKS 28 A.book Seite 20 Dienstag, 26. Februar 2019 10:51 10
Warranty
For this Würth tool, we provide a warranty in ac-
cordance with statutory/country-specific regulations
from the date of purchase (proof of purchase by in-
voice or delivery note). Damage that has occurred
will be corrected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the warranty.
Claims can be accepted only when the machine is
presented undisassembled to a Würth branch office,
your Würth sales representative or a customer serv-
ice agent for Würth pessure air and power tools.
Noise/Vibration Information
Measured
values
determined
EN 62841.
Typically the A-weighted noise levels of the machine
are:
Sound pressure level: 91 dB (A);
Sound power level: 102 dB (A).
Wear hearing protection!
Overall vibrational value (vector sum of three direc-
tions) determined according to EN 62841:
Vibrational emission value a
2
tainty K = 1.5 m/s
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 62841 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of the vibrational
impact.
The declared vibration emission level represents the
main applications of the power tool. However if the
power tool is used for other applications, with differ-
ent accessories or poorly maintained, the vibration
emission may differ. This may significantly increase
the vibrational impact over the total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool
is switched off or when it is running but not actually
doing the job. This may significantly reduce the
exposure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as: Main-
tain the power tool and the accessories, keep the
hands warm, organisation of work patterns.
20
We declare under our sole responsibility that this
product is in conformity with the following standards
or standardization documents:
EN 62841-1:2015,
EN 62841-2-5:2014,
EN 55014-1:2017,
EN 55014-2:2015,
EN 50581:2012, according to the provisions of the
regulations 2011/65/EU, 2006/42/EC,
2014/30/EU.
Technical file at:
Adolf Würth GmbH & Co. KG, Abt. PPT
Reinhold-Würth-Straße 12 - 17,
74653 Künzelsau, GERMANY
according
to
Frank Wolpert
Head of Product
Management,
Authorized Signatory
Künzelsau: 26.02.2019
2
< 2.5 m/s
, uncer-
h
Subject to change without notice
Declaration of Conformity
Dr.-Ing. Siegfried Beichter
Head of Quality,
Authorized Signatory
Publicidad
Tabla de contenido
