Operating Procedure - Maruyama MSD51 Manual Del Propietario - Operador

1. Lubricating oil.
Fill the lubricating oil into
the crankcase up to the center
level of the gauge.
2. Installing the suction
hose and overflow hose.
Be sure to be equipped packing.
Suction hose Overflow hose
※Overflow hose and Suction
hose are option.
3. Attaching the strainer
for the hose coupling.
※Overflow hose and Suction
hose are option.

Operating procedure

4. Insert the suction hose
and overflow hose into
the chemical tank.
5. Coincide knob of
pressure regulator with
START.
6. Close the valve.
7. Starting
Starting the engine.
8. Pressure regulation.
High
Operate after suction
confirmation.
9. Spraying
10. Stopping spraying
11. Wash up with the clean
water after spraying.
12. Running the Power
Sprayer.
Low
Running the Power Sprayer.
Open the
valves