Operating Procedure - Maruyama MS331 Manual De Instrucciones

Operating procedure

Preparatory
inspection
〜 Spraying
Be sure to check all the screws for
tightness.
1 lubricating oil.
Fill the lubricating oil into the
crankcase up to the center
level of the gauge.
2 Oiling
Feed a few drops of oil into
the 3 holes of the crankcase.
3 Installing the suction
hose and overflow hose.
Be sure to be equipped packing.
Suction
吸水ホース
4 Attaching the strainer for
the hose coupling.
5 Insert the suction hose
and overflow hose into
the chemical tank.
6 coincide knob of pres­
sure regulator with 0.
7 close the valve.
Overflow
排水ホース
hose
hose
— 2 — — 0 —
8 Starting
Please
bleed air by
opening cock
when water is not
being taken in.
9 Pressure regulation.
Pressure
indicator
10 Spraying
Open the
valves
Stopping
operation and
maintenance
11 Stopping spraying
Pressure value