Operating Procedure - Maruyama MSD41 Manual Del Usuario

1. Lubricating oil. 1. Lubricating 1. Lubricating 1. Lubricating oil. oil. oil.
Fill the lubricating oil into
the crankcase up to the center
level of the gauge.
2. Oiling 2. Oiling 2. Oiling 2. Oiling
Feed a few drops of oil into
the 3 holes of the crankcase.
3. Installing the suction 3. Installing the
3. Installing the 3. Installing the
hose and overflow hose. hose and overflow hose.
hose and overflow hose. hose and overflow hose.
Be sure to be equipped packing.
※Overflow hose and Suction
hose are option.

Operating procedure

Operating procedure
Operating procedure Operating procedure
4. 4. 4. 4. Attaching the trainer Attaching the trainer
Attaching the trainer Attaching the trainer
for for the hose coupling.
for for
※Overflow hose and Suction
hose are option.
5. 5. 5. 5. Insert the suction hose Insert the suction hose Insert the suction hose Insert the suction hose
and overflow hose into and overflow hose into and overflow hose into and overflow hose into
the chemical tank. the chemical tank.
the chemical tank. the chemical tank.
6 6 6 6 . . . . C C C C oincide knob of oincide knob of
oincide knob of oincide knob of
pressure regulator with pressure pressure pressure
START START. . . . START START
suction
suction suction
7 7 7 7 . . . . Close the valve. Close the valve.
Close the valve. Close the valve.
the hose coupling.
the hose coupling. the hose coupling.
regulator with regulator with regulator with
8 8 8 8 . . . . S S S S tarting tarting tarting tarting
Starting the engine.
9 9 9 9 . . . . Pressure regulation. Pressure regulation. Pressure regulation. Pressure regulation.
High
Operate after suction
confirmation.
10 10 10 10. . . . Spraying Spraying Spraying Spraying
11 11 11 11. . . . Stopping spraying Stopping spraying Stopping spraying Stopping spraying
Low
Open the
valves