Handling And Operating Method; Assembly Of Nozzle - Maruyama MS050 Manual De Propietario Y Operador

3. Handling and operating method

Assembly of nozzle and assembly of belly band

Assembly of nozzle

After confirming the existence of packing, securely tighten nozzle pipe to grip, and wide nozzle to nozzle
pipe. Tighten the screw securly after confirming the packing to make ensure there is no water leakage.
Over-tightening will cause extrusion or break the packing. Correct tightening pressure is important.
The adjustment of knapsack strap
1. Tighten the strap
Connect opposite side of hose to
discharge opening of the spraying
machine.
2. Loosen the strap
5
Ｅｎｇｌｉｓｈ