Models; Options; Compliance With Standards And Regulations; Ce Marking - Ingeteam INGECON SUN 2.5 TL Manual De Usuario

User Manual
INGECON® SUN LITE
AAY2000IKE01

1.1.1 Models

The principal models making up the INGECON SUN LITE range are as follows:
transformerless
INGECON SUN 2.5 TL
INGECONSUN 3.68 TL
INGECON SUN 5 TL
with transformer
INGECON SUN 2.5

1.1.2 Options

All the models from the INGECON
- DC disconnector
- RS485 push - pull connector
- MC3 type quick couplers
- Earthing kit (+ or -), available for those inverters equipped with a transformer.
-Communication accessories

1.2 Compliance with standards and regulations

These inverter models can be equipped with kits to adapt them to the standards and regulations in all European countries and
also those of other continents.
For projects in the United States or Canada, INGETEAM ENERGY has developed the INGECON SUN U SINGLE PHASE
family, which has its own manual.

1.2.1 CE Marking

The INGECON SUN LITE bear the CE marking, being compliant with the following directives:
Low Voltage Directive 2006/95/CE.
Electromagnetic Compatibility Directive 2004/108/CE.
For compliance with each directive, it is sufficient to comply with those parts of the appropriate harmonised standards that are
applicable to the INGECON SUN LITE units.

1.2.1.1 Low Voltage Directive

The INGECON SUN LITE are compliant with the Low Voltage directive through compliance with the applicable parts of
harmonised standard EN 50178 Electronic equipment for use in power installations.

1.2.1.2 Electromagnetic Compatibility Directive

The INGECON SUN LITE are compliant with this directive by compliance with the applicable parts of the following harmonised
standards:
- EN 61000-6-2 EMC. Part 6-2: Generic Standards - Immunity for Industrial Environments.
- EN 61000-6-3 EMC. Part 6-3: Generic Standards - Emission for residential, commercial and light industrial environments.
Compliance with these standards makes it necessary to comply with limits and procedures from other standards in the same
series.

1.2.2 VDE0126-1-1 Disconnection device

In countries such as Germany, Portugal and France, the incorporation of a device of this type ensures compliance with the exist-
ing standards and legislation in force for micro-generation and PV systems. Consequently, the INGECON SUN LITE inverters
comply with standard:
- VDE 0126-1-1 Automatic disconnection device for generating systems connected in parallel to the low voltage grid.
Compliance with this standard must be requested when the order is placed.

1.2.3 Connection regulations for the ENEL Distribuzione grid

In Italy, in order to connect to the ENEL company grid, the equipment must be compliant with the standards and regulations re-
quired by this company.
Consequently, the INGECON SUN LITE inverters are compliant with the applicable part of the following standard:
- RTC alle rete BT di Enel Distribuzione.
Compliance with this standard must be requested when the order is placed.
AAY2000IKE01
Rev. _
Date: MArch 2011
INGECON SUN 3 TL
INGECON SUN 3.8 TL
INGECON SUN 6 TL
INGECON SUN 3.3
SUN LITE range can be fitted with the following options:
INGECON SUN 3.3 TL
INGECON SUN 4.6 TL
INGECON SUN 5
Page 15 of 68