Attaching The Handlebar - Stihl MH 710 Manual De Instrucciones

6 Assembling the Cultivator
Attaching the blade spur
► Insert the adapter with attached blade spur (9)
into mount (10) on the tiller.
► Insert pin (11).
► Push retaining pin (12) through the bore in
pin (11).
► Install screws (2) and tighten firmly.
The blade spur is secured.
6.5

Attaching the Handlebar

► Fit lower handlebar (1) onto mount (2) and
align locating lug (3) with centre position (4).
► Screw pin (5) into locating lug (3) and tighten.
► Screw in screw (6).
Lower handlebar (1) is locked in place.
0478-404-9905-B
► Press lever (7) downwards and hold.
► Insert upper handlebar (8).
► Release lever (7) and allow upper handle‐
bar (8) to engage at centre detent (9).
Upper handlebar (8) is locked in place.
► Insert screw clamp (10) through lower handle‐
bar (1).
► Fit washers (11) and screw on nuts (12).
► Tighten nuts (12) so upper handlebar (8) can
be adjusted when opening lever (7).
► Insert cables and wiring harness (13) in
clip (14).
► Fasten the cables to the handlebar at regular
intervals using cable ties (15).
English
11