Assembling The Machine; Adjusting The Throttle Cable - Stihl BT 121 Manual De Instrucciones

Assembling the Machine

Mounting the Auger Brake Lever
: Place the activating lever (1) in the
retainer.
: Fit the clamp (2) on the activating
lever.
: Insert the screws (3) and tighten
them down firmly.
BT 121
Fitting the Padding
: Attach the holders (2) of the padding
(1) to the slots in the handle frame.
: Swing the padding upwards and
secure it to the handlebar with the
hook-and-loop strips (3).
English / USA
Adjusting the Throttle
Cable
A properly adjusted throttle cable is
the precondition for correct
operation in the full throttle, starting
throttle and idle positions.
: Use a suitable tool to push the slide
to the bottom of the slot (see
illustration).
11