Switching The Headlamp On And Off; Holding And Guiding The Tiller; Loosening Firm Soil Or Working Soil Additives Into Loose Soil; Tilling Loose Soil - Stihl MH 710 Manual De Instrucciones

12 After Finishing Work

► Unlock, press and hold the clutch lever for
self-propulsion.
► Adjust the engine speed using the throttle
lever.
The PTO rotates at the set speed.
Switching the PTO drive off
► Release the clutch lever for self-propulsion.
► If the PTO drive is no longer needed:
► Stop the engine.
► Attach the cover.
11.4 Switching the Headlamp On
and Off
► Press switch (1) on light switch (2).
The headlamp comes on.
► Press switch (3) on light switch (2).
The headlamp is switched off.
11.5

Holding and Guiding the Tiller

► Hold the tiller with both hands on handles (1)
so the thumbs enclose the handles.
11.6 Loosening Firm Soil or Working
Soil Additives into Loose Soil
► Place the front wheel in the operating position.
► Start the engine.
0478-404-9905-B
► Guide the tiller forwards and regulate the
working speed and working depth using the
blade spur.
► Move forwards slowly and in a controlled man‐
ner.
► If the hoes become blocked:
► Engage gear 0/R.
► Guide the tiller slowly backwards until the
hoes free themselves.
► Set the gear.
► Move forwards slowly and in a controlled
manner.
11.7

Tilling Loose Soil

► Place the front wheel in the operating position.
► Start the engine.
► Guide the tiller forwards and regulate the
working speed and working depth using the
blade spur.
► Move forwards slowly and in a controlled man‐
ner.
11.8

Making Furrows

► Place the front wheel in the operating position.
► Start the engine.
► Guide the tiller forwards and regulate the
working speed and working depth using the
blade spur.
► Move forwards slowly and in a controlled man‐
ner.
12 After Finishing Work
12.1 After Finishing Work
► Stop the engine.
► Allow the tiller to cool down.
English
19