Festo MTR−DCI Serie Manual De Instrucciones página 15

1 User
The MTR−DCI−... motor unit is an intelligent servo motor
consisting of DC motor, planetary gear, encoder and
integrated control electronics.
The higher−order PLC/IPC is connected via the controller
interface:
Type MTR−DCI−...−IO digital inputs/outputs
Type MTR−DCI−...−PB: PROFIBUS−DP
Type MTR−DCI−...−CO: CANopen
Type MTR−DCI−...−DN: DeviceNet
Commissioning and parameterization are carried out:
with the FCT software package and the MTR−DCI plugin
via the RS232 interface
or for type MTR−DCI−...H2 optionally with the control
panel (display and four operating buttons).
Note
This brief overview is a part of the operating package
type P.BP−MTR−DCI. It serves only as initial information
and does not replace the complete documentation,
which is contained as a PDF file on the CD ROM sup
plied.
S It is essential that you observe the information and
the safety instructions in the complete manual for the
motor unit.
S Please consult your local Festo Service or write to the
following e−mail address if you have any technical
problems: service_international@festo.com
Festo P.BE−K−MTR−DCI 0703b English
instructionsEnglish
15